Our policy is one of continuous research and development. We therefore reserve the right to amend, without notice, the specifications given in this document.AUTO #STARN/**5.4.186.0103/01G Non corrosive spool and sleeve for long trouble free life G Integral flow regulators for cylinder speed control on ISO #1 and #2 models G 16 bar (4 W) and 10 bar (1,5 W) models with non-locking manual override G 30 mm coils with connector interface acc. to DIN 43650 table ”A”G Wide range of sub-bases and accessoriesTechnical Data Medium:Compressed air, 40µm filtered, lubricated or non-lubricated Operation:Glandless spool valve, solenoid pilot or air pilot actuated Mounting:On sub-bases Sizes:ISO #1, #2 and #3Operating Pressure (maximum pressure):10 bar (145 psig) solenoid pilot (1,5 W) actuated valves 16 bar (232 psig) solenoid pilot (4 W) actuated valves 16 bar (232 psig) air pilot actuated valvesDetails of minimum and maximum pilot pressure see overleaf Flow Characteristics (unregulated):Size Function ‘C’‘b’‘A’l/min Cv Kv ISO #1 5/25,500,0619,7012301,201,08ISO #15/3 APB 5,700,1421,1413201,351,15ISO #2 5/210,700,1239,2024502,452,16ISO #25/3 APB 10,720,1640,4025202,572,20ISO #3 5/219,000,1470,4544004,483,84ISO #35/3 APB 19,840,1674,5446504,744,06Ambient Temperature:–15°C* to +50°C (5°F* to +122°F) solenoid pilot actuated valves –15°C* to +80°C (5°F* to +176°F) air pilot actuated valves*Consult our Technical Service for use below +2°C (36°F)Materials:Die cast aluminium body. Hard anodised, Teflon coated, matched aluminium spool and sleeve. Viton and nitrile rubber static seals. Zinc die cast locking plate. POM plastic parts.Zinc plated screws. Brass flow regulators.For technical data on ISO 5599-1 sub-bases and accessories see sections 5.4.187 and 5.4.188Ordering InformationTo order select model and add voltage code from page 5.4.186.04 e.g. SXE9573-Z81-81/33N for a 5/2 solenoid pilot (16 bar) / spring returned ISO #1 valve with internal pilot air supply, integral flow regulators and 30 mm coil 24 V DC/4 W with connector interface acc. to DIN 43650 table ”A”.5/2 and 5/3 Glandless Valves Solenoid and Pilot ActuatedSub-base Mounted ISO 5599-1 #1, #2, #35/25/3All ports blocked,mid position5/3Centre open exhaust, mid position5/3Centre open pressure, mid position

诺冠电磁阀选型表