File: /home/zs/我的帮助文档/linux-wireshark/说明Page 1 of 1 Linux-wireshark安装1.下载libpcap-x.x.x.tar.gz和wireshark-x.x.x.tar.bz2压缩包(版本自选,此处选用libpcap-1.3.0.tar.gz和wireshark-1.8.4.tar.bz2)Wireshark 网址 http://sourceforge.net/projects/wireshark/libpcap 网址 http://www.tcpdump.org/2.解压libpcap-1.3.0.tar.gz(tar xvf libpcap-1.3.0.tar.gz)得到libpcap-1.3.0文件夹.cd libpcap-1.3.0sudo ./configuresudo make此步可能遇到flex文件找不到的错误,运行sudo apt-get install yum解决.若还遇到关于byacc的错误，运行sudo apt-get install -y byacc解决.重新sudo ./configure 和sudo make3.运行sudo make install安装libpcap.4.解压wireshark-1.8.4.tar.bz2(tar xvf wireshark-1.8.4.tar.bz2)得到wireshark-1.8.4文件夹.cd wireshark-1.8.4sudo ./configure.此处可能遇到无法创建GTK+文件或者类似的错误，运行sudo apt-get install libgtk2.0-dev libglib2.0-dev解决.重新sudo ./configure5.运行sudo apt-get install checkinstall.6.运行sudo make7.运行sudo checkinstall,出现选项列表直接输入ENTER.8.输入sudo wireshark运行.(注意:此处必须要用管理员权限运行,否则wireshark将出现无法检测到网(Interface)的情况).

Linux下wireshark安装方法，附带一些问题的解决方式