服装QC验货评语

collar  領

Unbalance collar 領不平衡

Asymmetric collar  領位不對稱

Uneven collar width   左右領闊不一致

Uneven neckline  左右領圈不一致

Uneven collar point  領尖不對稱

Uneven lapel shapes    左右前領咀形狀不一樣

Too much easing at C.F. neckline 前領口溶位太多(有太多溶位於前中領窩)

Collar too tight at CB 後領中太緊

Collar band is twisting  領座扭曲不平順

Fullness at front collar and lapel  領及前領咀不平順

Neckline is not smooth  領圈不圓順

Neck setting not smooth  領子裝得不平順

High & low back neck  後領圈有高低

Edge of front opening is crooked  前門領邊不直

Front opening not straight  前門領邊不直

Front facing is exposed at bottom hem  前門領貼在下擺處外露

Front opening facing is shorter than body  前門領貼短於大身

Neck was stretched  領圈拉松

Too much tie on front collar  前領處有豁口

Sleeve & Armhole  袖&夾

Puckering at left/right armhole 左右夾圈有溶位不平伏.

Too loose at right armhole, uneven for left/right armhole 右夾圈有拉松, 左右夾圈不相稱.

Sleeve running to back(衣袖走後) / Sleeve running to front(衣袖走前) 操兵袖

Too loose at front sleeve seam 前袖骨拉松

Too tight at back sleeve seam 後袖骨過緊.

Poor cuff setting  卡夫裝得不好

Sleeve placket is not set well  袖叉裝得不好

Underarm seam was stretched  袖底縫被拉松

Armhole setting not smooth  袖孔不圓順

Ease on sleeve cap is uneven  袖頂縮拱不均勻

Front/back  前後幅

Hiking at front, CF facing too short 吊襟

Hiking at back, lining too short 吊裡

Curve at CF zip(too much fullness at CF zip) 前中拉鏈溶位太多

Curve at CF zipper because of no easing of zipper. 前中拉鏈無溶位(引致紐曲)

Hiking at back / Hiking at front 後幅吊起 / 前幅吊起

Front panel is bigger than under panel(lining)  前幅底幅細面幅松

Lining too big, too short, too small, too long 裡布太大, 太短, 太小, 太長

Grain lines are not match at front & back panel 前後幅布紋不相稱

Front length uneven  左右前長不一致

Too loose at shell, Too loose at back/lining, turn insider out 底松, 面鬆, 向外反

Pocket   袋

High-low pocket    高低袋

Both pocket set uneven  左右口袋裝得高低不一

Pocket not smooth / squared  袋不平服/不夠正方

Pocket flap not centered over pocket  袋蓋不正中

Both pocket shapes are uneven  左右口袋形狀不一致

Bottom part of pocket is sagging  口袋下部下垂

Pocket flap is misplaced  袋邊位置不對

Pocket is misplaced  口袋位置不對

Pocket is smiling  袋口開得不吻合

Pocket opening is fray  袋口有毛口

Pocket shape distorted  口袋變形

Pocket size and shape is not follow sample exactly                                      口袋的尺寸及形狀未按照實樣做

Pocket welt is uneven  上下袋唇不均勻

Poor pocket setting  口袋裝得不好

Binding  拉捆

Piping is uneven  捆邊不均勻

Piping is twisting and not smooth  捆邊扭曲不平順

Pleats  縮褶

Uneven shirring at back waist seam

後腰縮碎褶不均勻。

Shirring  碎褶

Elastic shirring is uneven  橡筋縮拱不均勻

Both side pleats not balance  左右褶位不一致

Darts placement is not follow sample exactly  褶位未按照實樣做

Pleats is misplaced  褶位不對

Shirring / Gathering 縮褶

Pleated 生褶

Darts 死褶

Beading & embroidery  釘珠&繡花

Beads stitching are not secure  珠子未釘牢

Embroidery stitching is too tight 繡花線太緊

Embroidery stitching too loose  繡花線太松

SHADING DEFECTS 色差問題

1)              Color shading  色差

2)      Color shading within one garment.  同一件衣服內有色差。

3)      Color shading between trims and body.  配件與衫身之間有色差。

4)      Shade differs from approved standard.  顏色與批核色版不同。

5)      Shading caused by poor color interlining matching. 紙朴顏色不配合, 引致色差。

ACCESSORIES  輔料問題

1)      Missing button / label / badge   漏鈕 / 漏嘜頭 / 漏章

2)      Button position not well match buttonhole. 鈕與鈕門位置欠配合

3)      Button inside out  鈕的底面倒置

4)      Button marking not removed.  點鈕筆痕沒有清除

5)      Damaged button/buttonhole  鈕爛/爛鈕門

6)      Rusted stud   工字鈕生銹

7)      Paint peel off on stud  工字鈕顏色脫落

8)      Button and buttonhole not aligned cause bulge.  鈕及鈕門位置不配合, 引致谷起

9)      Buttonhole too small to allow button to pass through.  鈕門太細, 鈕不能順利通過

10)   Uncut buttonhole / partially cut buttonhole  鈕門未幵 / 鈕門未開盡

11)   Ragged edges at buttonhole  鈕門紗線不清

12)   Broken buttonhole stitches  鈕門斷線

13)   Button thread easily pulled out. 釘鈕線容易拉脫

14)   Snap / rivet easily pulled off.吸鈕、撞鈕容易拉脫

15)   Buttonhole is not match button size  鈕洞尺寸與鈕扣大小不相配

16)   Button misplaced  鈕扣位置不對

17)   Buttonhole misplaced  鈕洞位置不對

18)   Button is not sewing security  鈕扣未釘牢

19)   Button is sewn too tight  鈕扣釘得太緊

20)   Buttonhole is fray  鈕洞有毛口

21)   Key buttonhole density is too loose   鳳眼鈕洞的車縫線步太疏

22)   Key buttonhole is misplaced  鳳眼鈕洞位置不對

23)   Snap misplaced  揿鈕位置不對

24)   Snap tape is misplaced  撳鈕扁帶位置不對

25)   Snap tape setting not well  撳鈕扁帶裝得不好

26)   There is bubble on buttonhole area  鈕洞周圍有氣泡

27)   Hood and bar is misplaced  裙扣位置不對

28)   Hole at zip top / end  拉鏈頂 / 尾有洞

29)   Zipper setting is twisting  拉鏈裝得扭曲

30)   Shoulder pad not attach to garment security 肩棉未釘牢

31)   Shoulder pad not cover well  肩棉未包好

32)   Velcro is misplaced  么朮貼位置不對

33)   Waistband belt is not set straight  腰耳裝得不直

34)   Waistband belt length and width are uneven                                              腰耳的長、寬不一致

35)   Incomplete adhesive on interlining.  黏朴未完全黏好

36)   Strike through of adhesive on interlining.  黏朴膠露面

37)   Strike back of adhesive on interlining.  黏朴脫落

38)   Blistering occurred on interlining.  黏朴起泡

39)   Insecure shoulder pad attached. 肩棉釘縫不穩

40)   Label placement incorrect.  嘜頭位置不正確

41)   Care label content not as specified.  成份嘜內容不符合要求

42)   Main label and size/content label are set too closed                                       主嘜與尺碼成份嘜裝得太靠近

43)   Main label setting is misplace  釘主嘜不井齊

44)   Wrong care label sewn on garment.    成份嘜車錯位置

45)   Label not properly secured.  嘜頭車縫不穩

46)   Label sewn beyond label edge.  嘜頭車縫太入

47)   Label sewing seam uneven / puckered.   嘜頭車縫不平均或起皺

48)   Wrong accessories used.  用錯輔料

Button out of line.  鈕位不成直線

STITCHING AND SEAMS 線步和骨位

1)      Raw edge  散口

2)      Raw edges  爆口

3)      Untrimmed thread ends  線頭未剪

4)      Skipped stitches  跳線

5)      Exposed stitching 露線

6)      Broken stitches  斷線

7)      Run-off stitches  間線落坑

8)      Crooked stitches  線步彎曲

9)      Poor join stitching  駁線欠佳

10)  Unsightly over-lapping stitches 駁線不良

11)  Stitches too loose  線步太松

12)  Stitches too tight  線步太緊

13)  Distorted stitches  車線不直

14)  Broken seams  縫線爆幵

15)  Expose stitch  落坑線外露

16)  Inconsistent stitching  線步不一致

17)  Uneven width on double stitching 雙線闊窄不均

18)  Uneven stitching density / tension    線步密度 / 鬆緊度不平均

19)  1/4 top stitch not even  1/4面線有寬窄

20)  Expose safety stitch  保險線外露

21)  Inseam is uneven  內縫線不井齊

22)  Merrow stitch density is too big  撥邊線步太疏

23)  Overlap stitch is not well  反縫的接線不好

24)  Top & under stitch tension not match  底面線力不相符

25)  Uneven merrow seam  內撥邊線彎曲不直

26)  Missing reinforcement stitches  漏車加固線步

27)  Row of stitching missing – top stitch  漏車一行線——平車線

28)  Stitch count less than standard  線步較標準少

29)  All top stitch is uneven  所有的面線都不均勻

30)  Blind stitch is broken  筒針有斷線現象

31)  Blind stitch is wavy  筒線彎曲不直

32)  Shoulder seam not smooth  小肩縫彎曲不直

33)  Uneven folded width at bottom sweep 1/2〞hemming.  折車1/2〞腳圍闊窄

34)  Blind stitching visible  挑腳線露面

35)  Incomplete seam stitching  線步不到尾

36)  Uneven for hem closure stitching, uneven stitch at hem 下腳車線不直

37)  Exposed waistband running stitches 裙頭/褲頭見坑線

38)  Not straight at front fly 褲鈕牌車線不順直

39)  Not straight at back yoke 後擔干車線不直, 紐曲

40)  Skipping stitches, looping stitches 跳線, 車線太鬆起耳仔

41)  Seam allowance, sewing thread too tight 子口補間線, 線太緊起豆角

42)  Pleated seam  骨位打褶

43)  Puckered seam  骨位起皺

44)  Open seam   爆骨

45)  Burst seam   爆骨

46)  Under seam visible  底骨露面

47)   Waviness on seams  骨位起波浪

48)   Twisted seams / Seam rolling   扭骨

49)  Twisting at side seam, Wavy at side seam 側骨紐, 不順直.

50)  Seam closures uneven  骨位結尾不平均

51)   Missing bar-tack  漏打棗

52)   Seam not properly secured  骨位不牢固

53)   Fullness on seams  骨位太谷, 不平伏

54)  Seam not fully opened before stitching.   骨位未完全撥開間線

55)  Cracked seam  骨位拉時有響聲(引致斷線)

56)  Too loose at princess seam 前公主骨拉松起泡

57)  Puckering at back princess seam 後公主骨溶位太多, 起皺/起豆角

58)  Too tight or too loose at side seam. 側骨車線太緊或太鬆

59)  Too loose at CF / CB seam 前中/後中骨太松

60)  Too loose at shoulder seam, unbalance of front & back panel at shoulder seam             肩骨拉松(要落定位)

61)  Too flat at shoulder seam, too slant of shoulder seam 肩骨太平/太斜

服装QC验货评语